[FC] Damaged Starter Gear

[Gary]

Depending on the condition of the starter drive, is it rusted up? does it
move freely?
otherwise not a big deal changing the drives.
Remove the solenoid, then remove the pin holding the actuator, then remove
the nose of the starter.
There will be a "C" clip holding the drive on the armature.
Use the starter nose with the best bushing
check the actuator to make sure the pins are not badly worn.
Re-assemble........

Gary Swiatowy

----- Original Message -----
From: "* Greenbrier Goon *" <greenbriergoon@hotmail.com>
To: <corvanatics@corvair.org>; <virtualvairs@skiblack.com>
Sent: Tuesday, April 27, 2004 1:28 AM
Subject: [FC] Damaged Starter Gear


> Hey everybody:
>
> The 4 speed conversion of my FC is underway.
>
> I discovered that my starter has a damaged gear and I would like to fix it
> so the pressure plate gear doesn't get damaged.
>
> I have a junk starter with a good gear.  Can this be swapped into my
starter
> or is this a major rebuild?
>
> Charles
>
>
>
> Greenbrier World:
> http://www.c-zone.net/northgte/greenbrier.htm
>
> 1963 Greenbrier PG (soon to be 4 speed)
>
> Don't let Ralph Nader ruin another Presidential election.
> http://www.ralphdontrun.net
>
> _________________________________________________________________
> Watch LIVE baseball games on your computer with MLB.TV, included with MSN
> Premium!
>
http://join.msn.com/?page=features/mlb&pgmarket=en-us/go/onm00200439ave/dire
ct/01/
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/