[FC] Wiring harness difference

[Thomas L. Gwyther]

My father put a '65 gb engine into his '62 rampside temporarily.

We checked out the harnesses very carefully and found out the only
difference is there is an extra wire for the resistor bypass from the
starter in the later ones.  The original one didn't have this feature.

I am planning on adding this wire to my '61 rampside, it will help it start
easier when it is cold.

----- Original Message -----
From: "Keith Hammett" <khammett@stainlessfab.com>
To: <corvanatics@corvair.org>
Sent: Thursday, December 09, 2004 2:03 PM
Subject: [FC] Wiring harness difference


> On VV it was brought up that the wiring might be different on the '64 and
> '65 FC (alternator).  I thought that the only difference was the engine
> harness, a quick look in Clark's online catalog showed a different number
> for the main harness on the '61-'63 FC and the same main harness for the
'64
> & '65 FC.  Anybody know the difference?
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/