[FC] deflashing heads....

[Williams, Rickie]

What I want to know is where can I buy the foot long 1/8 inch drill bit and
the 1/8 inch rod saw that you mention?  In this small town, those items are
unheard of...so preferably a source from the internet if you know of one.

Thanks,
Rickie Williams
Columbia, KY

> ----------
> From: 	Merv and or Loretta[SMTP:krupross@sunwave.net]
> Reply To: 	corvanatics@corvair.org
> Sent: 	Monday, February 09, 2004 9:54 PM
> To: 	corvanatics@corvair.org; corvairs@cybrus.net
> Subject: 	[FC] deflashing heads....
> 
> Hi all!
> 
> Dropped the motor, put it on the bench, drained the oil, cleaned off a
> bunch
> of gunk, removed some shields, tipped it up on the bell housing end, ready
> to
> take the rest of the shields off.
> 
> Then I'm going in to deflash the heads. I bought a 1/8" x 12" drill bit,
> and I
> have a 1/8" rod saw to do the work.
> 
> Any advice from those who have done this before....?
> 
> Much obliged folks!
> 
> Merv Krull
> Salmon Arm
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics