[FC] Special Oil Filter Bolt for Sender

[srmarti]

Use a soft copper gasket instead of a fiber one?

Steve

> -----Original Message-----
> From: corvanatics-admin@corvair.org
> [mailto:corvanatics-admin@corvair.org]On Behalf Of * Greenbrier Goon *
> Sent: Monday, February 09, 2004 10:49 PM
> To: corvanatics@corvair.org; virtualvairs@skiblack.com
> Subject: [FC] Special Oil Filter Bolt for Sender
>
>
> Hey everybody:
>
> I have one of those special oil filter bolts that allow a sender
> for a gauge
> to be threaded into it.
>
> I have a brass T with the oil pressure gauge sender and the oil pressure
> switch in it.  The temp sender is in the stock oil pressure
> switch location.
>
> Anyway, the bolt does not ground to anything when it is installed.
> Therefore, the senders will not function.  I came up with a quickie
> temporary solution by taking a piece of galvanized steel wire and
> wrapping
> one end around the base of the T and the other end around the fuel pump
> block-off bolt.
>
> Does anyone have a more professional looking solution to this?
>
> Charles
>
>
>
> Greenbrier World:
> http://www.c-zone.net/northgte/greenbrier.htm
>
> 1963 Greenbrier PG (soon to be 4 speed)
> 1963 Corvair 95 4 Speed (soon to be scrap)
>
> _________________________________________________________________
> Optimize your Internet experience to the max with the new MSN Premium
> Internet Software. http://click.atdmt.com/AVE/go/onm00200359ave/direct/01/
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics