[FC] FC Fuel tank

[J R Read_HML]

Clean and reseal the one you've got (in and out).  Replace whatever you need 
to on the sending unit.  Test it with an ohm meter.  Put it back together 
and back into the normal place.  Don't know if I'd use one of the new 
plastic floats - heard a couple of war stories about those already.  You'll 
be good for another 40+ years!

Attachments are scanned with anti-virus software.

Later, JR
'61 Rampside Standard 4/110
'65 Monza Convertible 4/140
'66 beater Coupe - icemobile 4/140

----- Original Message ----- 
From: "Vic" <vichoward@mohaveaz.com>
To: <corvanatics@corvair.org>
Sent: Sunday, September 12, 2004 7:21 PM
Subject: [FC] FC Fuel tank


>I just removed the fuel tank from my Rampside. Whew! That went ok only 
>because
> I have a lift I could run it onto and get to things easily. Mine came out
> because the fuel sender unit quit working and as I suspected, the float 
> was
> filled with gasoline. My question is- - -  has anyone put any other tank 
> in an
> FC? I'm thinking of purchasing some kind of tank to mount in the bed of 
> the FC
> and the put in a "new" false floor of diamond plate steel or aluminum over 
> it.
> The additional space under there could either be for tools or the spare 
> tire.
> Any ideas or suggestions?
> Thanks
> Vic Howard
> Pres. Vegas Vairs
> owner: 61 Rampside, 110, 4 spd
>            66 Monza coupe, 140, AT,AC,Telewheel and much more
> _______________________________________________
> Corvanatics mailing list
> Corvanatics@corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/