[FC] torque converter snout

[Paul Steinberg]

now you say you want cores when I took over 30 of them to the scrap metal yard a couple of weeks ago.  Couldn't give them away on this coast and the cost of shipping them West would have been prohibitive.. Paul in CT
  ----- Original Message ----- 
  From: David C. Herrin III 
  To: 'The Corvanatics list' 
  Cc: Jim Davis 
  Sent: Thursday, December 01, 2005 7:41 PM
  Subject: RE: [FC] torque converter snout


  Gentlemen,

  We used to "repair" these via a specialized hot metal spray process.

  If there was any current interest - ? 

  We could make some more up for direct exchanges.

  I think I would need some cores - so please do not discard - send them in.

   

  Additionally we have an OEM torque converter bushing 

  w/ a special feature = lubrication grooves.

  We stock a special torque converter seal (diff external seal)

  Plus we offer remanufactured stock and HP (soon) torque converters.

  David

   

  If it is not to bad you can just rotate it 180 degrees.. This does 

  require complete disassembly of the differential. <snip> Be aware there are
  two different ones one for 60-61 plus early 62 and mid 62 on.  No they are
  not interchangeable

   

  >Hi Guys:: Does anyone know where to faind a repair sleve for the 

  >torque converter snout? Mine has aready chewed a new seal in 

  >a  couple hunded miles. 

  _______________________________________________
  Corvanatics mailing list
  Corvanatics at corvair.org
  http://www.vv.corvair.org/mailman/listinfo/corvanatics
  This list sponsored by the Corvair Society of America, http://www.corvair.org/