[FC] Re: <VV> Carb Return Spring

[Clark Hartzel]

You can put as strong a spring as you can stand!  How hard do you want 
to keep pressing down on it?  I guess the springs should be stiff enough
to return the throttle to idle but not so stiff you get "cramps" trying 
to drive it!
Clark Hartzel

-----Original Message-----
From: corvanatics-bounces at corvair.org
[mailto:corvanatics-bounces at corvair.org]On Behalf Of JEBuie
Sent: Monday, July 04, 2005 10:44 AM
To: corvanatics at corvair.org; virtualvairs at corvair.org
Subject: Re: [FC] Re: <VV> Carb Return Spring


Thanks for the help guys,Your responses were way quicker than my reply
to show my appreciation. What better resource than the folks on both
lists. I had about 10 responses in a few hours,What a great hobby we
share.
Acouple of you mentioned the spring up front under the pedal...its
missing also...a check in the assembly manual shows the same part# as
the return spring..is it the same one or do I need a slightly beefier
one?...Anyway,thanks again and Tim Colson put it best...Lube everything
and its "tinker time":)

Jon Buie
Goldsboro NC
CORSA/NC
'65 Monza Vert 110/PG Group Red
'61 Rampside 80/3spd Sticky Throttle