[FC] FRONT CROSSMEMBER

[N2VZD at aol.com]

i would look into a comeplete good one, depending on where you live.  go thru 
it before installing it, get every bolt working freely and oil up the insides 
etc then paint it up with something tough. if you budget stands it i would do 
the por 15 stuff. if you rebuild yours do the same thing. get pb blaster 
(best penetrant)up in the cage nuts on top of the frame way before attempting to 
remove it.  after getting it back on the car get a good front man to check the 
car. 
regards, tim colson