[FC] fuel tank sender

[Keith Hammett]

Ken,

I would not say that is a repair.  More like a rebuild using used
parts...ggg

Good idea...

Keith Hammett

-----Original Message-----
From: corvanatics-bounces at corvair.org
[mailto:corvanatics-bounces at corvair.org]On Behalf Of VairMech at aol.com
Sent: Wednesday, June 29, 2005 4:31 PM
To: corvanatics at corvair.org
Subject: Re: [FC] fuel tank sender



In a message dated 6/29/2005 2:31:43 P.M. Eastern Daylight Time,
khammett at stainlessfab.com writes:

On the  fuel sender I don't know that you can "fix" them.  You can check  it
with an ohm meter 0 - 45 ohm.  If bad you replace with a good used  one (you
cannot buy new ones that I know of).


>>>>>>>>>>>>>
    I beg to differ some.
    The sending units can be repaired, I have repaired  them myself. You can
take a known good early sender and use the  resistor for the FC. The pickup
tube can be cleaned in and out and  reassembled.
    Ken Hand
_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America,
http://www.corvair.org/