[FC] 2 Inch Plug for Shroud Hole?

[Merv Krull and or Loretta Prosser]

How about your local GM parts department?
toodles
Merv Krull
Salmon Arm, BC

----- Original Message ----- 
From: "Western Canada CORSA" <westerncanadacorsa at shaw.ca>
To: "'The Corvanatics list'" <corvanatics at corvair.org>
Sent: Saturday, March 26, 2005 8:11 AM
Subject: RE: [FC] 2 Inch Plug for Shroud Hole?


>I don't know if they'll have something quite that big, but you could also
> try your local paintless dent removal shop.  They need plugs to fill the
> holes they drill in the body to access the dents.
>
> Regards,
> Joel
>
> -----Original Message-----
> From: corvanatics-bounces at corvair.org
> [mailto:corvanatics-bounces at corvair.org]On Behalf Of N2VZD at aol.com
> Sent: Saturday, March 26, 2005 3:35 AM
> To: corvanatics at corvair.org
> Subject: Re: [FC] 2 Inch Plug for Shroud Hole?
>
>
> try a radio supply house. they have plugs that size for chassis work in
> steel, aluminum and screened for vents.  otherwise a used parts
> emporiom(junkyard)
> should have assortments of plastic ones. on my rampy and van i brazed a
> piece
> of steel in top shroud to fill dipstick hole.        looks good.  regards
> tim
> colson
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/