[FC] FC towbar

[James Davis]

The bumper on an FC and the bumper brackets will take a class "A" 
bumper hitch without a problem.  In fact the holes are already in the 
bumper for the bumper hitch.  With a few changes you can make it a 
class "C" hitch.
Jim Davis

At 08:19 AM 1/21/2006, Vic Howard wrote:
>
>Maybe I didn't ask the question properly, I am looking to put a towbar on
>the back of my Rampside so I can tow a utility trailer. (single axle 4' x8')
>Thanks
>Vic Howard
>
>
>=========================================================================
>  Are you looking to tow a particular vehicle frequently?
>If so, most of the places like Harbor Freight have a tow bar that is
>Generally used to tow behind a motor home. You have to install attaching
>Points to the "towed" vehicle.
>
>Gary Swiatowy
>
>From: "Vic Howard" <vichoward at frontiernet.net>
>To: <corvanatics at corvair.org>
>Sent: Friday, January 20, 2006 11:53 PM
>Subject: [FC] FC towbar
>
>
> >I know Clarks has a towbar available in their catalog but it seems to only
> > bolt onto the bumper. Is there
> > Another type that bolts onto the frame and the bumper or will I need to
> > custom make one ?
> > Vic Howard
> > 61 Rampside
> >
>
>_______________________________________________
>Corvanatics mailing list
>Corvanatics at corvair.org
>http://www.vv.corvair.org/mailman/listinfo/corvanatics
>This list sponsored by the Corvair Society of America, http://www.corvair.org/