[FC] brakes

[Paul Steinberg]

There is a very thin steel washer between the adjuster and the small slotted end of the adjuster.  This is to keep the two parts from binding and must be properly lubricated to work properly.  It is similar in size, but not the same.  
Paul in CT
  ----- Original Message ----- 
  From: Bryan Blackwell 
  To: vair65 at netzero.net 
  Cc: corvanatics at corvair.org 
  Sent: Tuesday, February 13, 2007 1:45 PM
  Subject: Re: [FC] brakes


  Ok, it's been a little while, but doesn't it go between one adjuster 
  end and the star wheel?

  --Bryan

  On Feb 13, 2007, at 1:28 PM, vair65 at netzero.net wrote:

  > 1) Does the wave washer go between the shoe and clip or does it go 
  > between the e-brake arm and shoe?

  _______________________________________________
  Corvanatics mailing list
  Corvanatics at corvair.org
  http://www.vv.corvair.org/mailman/listinfo/corvanatics
  This list sponsored by the Corvair Society of America, http://www.corvair.org/


  -- 
  No virus found in this incoming message.
  Checked by AVG Free Edition.
  Version: 7.5.441 / Virus Database: 268.17.37/682 - Release Date: 2/12/2007 1:23 PM