[FC] brakes

[Ron]

The wave washer is of spring steel whereas a stock washer is of soft iron 
and cannot substitute for the wave washer.
RonH

----- Original Message ----- 
From: <vair65 at netzero.net>
To: <corvanatics at corvair.org>
Sent: Tuesday, February 13, 2007 10:28 AM
Subject: [FC] brakes


> Gentlemen and Ladies,
> I am trying to put the brakes back on the 62 rampside, but have a couple 
> of questions that I cannot find in the shop manual.
> 1) Does the wave washer go between the shoe and clip or does it go between 
> the e-brake arm and shoe?
> 2) Is there a source for the wave washer, or do I need to grind down a 
> washer and wave it myself?
> 3) Just want to confirm that the cap of the adjuster (opposite end of the 
> threaded end) goes towards the front on the left side and the rear on the 
> right.
> Thanks,
> Keith Hammett
> Willard, Mo.
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
>