[FC] Greenbrier 64 differential with late guts

[N2VZD at aol.com]

i have the same setup in 2 of my fc's . BUT i have removed the bolt blocks  
and use stock axle assemblies . the only reason i did all this was because i 
had  2 very low mileage lates going to waste here. i have run the one unit @ 
8000  miles so far with no problem. i fear it puts too much stress on one surface 
of  the axle bearing not having the exact space setup between the lower  
control arm and the backing plate. the system was really thought out , if you  
study it a while, and easy to screw up.
there were pictures of this fiasco posted on the website a couple years  ago. 
 _www.corvair.de/n2vzd/_ (http://www.corvair.de/n2vzd/) 
 i consider it a waste of time unless you are really desperate, and  
ambitious.(press pinion on early shafts etc etc etc 
regards, tim colson  
carrying a spare axle now...



**************It's Tax Time! Get tips, forms and advice on AOL Money & 
Finance.      (http://money.aol.com/tax?NCID=aolcmp00300000002850)