[FC] PG pressure on coolant lines

[Ken Hand]

?? I would have to say that the pressure is way less than 150 PSI because that is all the rubber hose is rated for. I would think if there were any leaks then they would show up at 50 PSI if you are using regulated air and a water bucket.


Ken Hand
248-613-8586
www.corvairmechanic.com 


-----Original Message-----
From: Keith Hammett <keith.hammett at stainlessfab.com>
To: corvanatics at corvair.org
Sent: Thu, 3 Jan 2008 1:30 pm
Subject: [FC] PG pressure on coolant lines



Anyone know the pressure on the oil cooler on a PG?  I checked in the
articles that Bob Ballew did but found nothing on the pressure on the
coolant lines, just main line pressures which would be too high for the
rubber hose connections.  Mine was not hooked up and I would like to
test mine for leaks and would like to know what to test at.

 

Thanks,

Keith Hammett

_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/


________________________________________________________________________
More new features than ever.  Check out the new AOL Mail ! - http://webmail.aol.com