[FC] engine cover

[Ron]

This Robertson Button Head must be a foreigner!  Isn't that what we're 
trying to keep out?
RonH

----- Original Message ----- 
From: "Western Canada CORSA" <westerncanadacorsa at shaw.ca>
To: <corvanatics at corvair.org>
Sent: Monday, January 28, 2008 11:14 AM
Subject: Re: [FC] engine cover


> All this talk about the different kind of hardware to use, and not one
> suggestion for S/S Robertson Button Head Bolts.  That's "square" for you
> 'mericans.  Far superior to either Philips or slotted heads.
>
> Regards,
> Joel
>
> -----Original Message-----
> From: corvanatics-bounces at corvair.org
> [mailto:corvanatics-bounces at corvair.org] On Behalf Of Bill Wells
> Sent: Monday, January 28, 2008 11:08 AM
> To: corvanatics at corvair.org
> Subject: Re: [FC] engine cover
>
>
> Folks,
>
>  Boltdepot.com has what you want and cheap. I am using 3/8 stainless
> phillips button head bolts on my trans cover and stainless slotted button
> head on my engine cover. they buff to a great shine.
>
>  Good luck,
>  Bill
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it
> now. _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
>
>