[FC] 4 carb motors

[Gary Swiatowy]

I've seen several 4-carb motors in vans.
Generally, the 140 HP 4-carb motor is a late model motor requiring 
installation of modified early model engine sheet metal (shrouds). The 
factory 140 air cleaner assembley has to be replaced with something that 
will firtt under the hood, usually 4 small air cleaners.

The 140 though, seems to be a little bit sensitive about overheating in an 
FC.

Gary Swiatowy

----- Original Message ----- 
From: "Jimmy Harris" <harrisjimmy60 at yahoo.com>
To: <corvanatics at corvair.org>
Sent: Monday, March 02, 2009 6:06 PM
Subject: [FC] 4 carb motors


64 corvair van new owner Will a 4 carb motor fit in a van? Also are all 4 
carb motors 140 hp?Anyone out there know? THANKS for your help Jimmy

--- On Sun, 3/1/09, corvanatics-request at corvair.org 
<corvanatics-request at corvair.org> wrote:

From: corvanatics-request at corvair.org <corvanatics-request at corvair.org>
Subject: Corvanatics Digest, Vol 50, Issue 1
To: corvanatics at corvair.org
Date: Sunday, March 1, 2009, 5:00 PM

Send Corvanatics mailing list submissions to
corvanatics at corvair.org

To subscribe or unsubscribe via the World Wide Web, visit
http://www.vv.corvair.org/mailman/listinfo/corvanatics
or, via email, send a message with subject or body 'help' to
corvanatics-request at corvair.org

You can reach the person managing the list at
corvanatics-owner at corvair.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Corvanatics digest..."


Today's Topics:

   1. Re: Wanted  Gm Factory  Corvair Engine Cradle! (Ken Hand)


----------------------------------------------------------------------

Message: 1
Date: Sat, 28 Feb 2009 18:58:26 -0500
From: Ken Hand <vairmech at aol.com>
Subject: Re: [FC] Wanted  Gm Factory  Corvair Engine Cradle!
To: corvanatics at corvair.org
Message-ID: <8CB681794A149FC-13CC-EDE at WEBMAIL-DC04.sysops.aol.com>
Content-Type: text/plain; charset="us-ascii"


??? I have to ask, why do you want one? There are instructions on various 
sites
on how to make something for your floor jack. Also the motorcycle jack has 
been
used quite successfully. If I have to remove one on the floor, I personally
still prefer the 2X6 on top of the floor jack.





Ken Hand
248-613-8586
www.corvairmechanic.com






-----Original Message-----
From: eddie iglar <matchlessmo at yahoo.com>
To: corvanatics <corvanatics at corvair.org>
Sent: Sat, 28 Feb 2009 1:49 am
Subject: [FC] Wanted  Gm Factory  Corvair Engine Cradle!










Hello i am looking too buy a? Gm factory? corvair engine cradle ! and if you
have a factory jack that operates the engine cradle ?,i am interested in it
tooo. thks eddie



_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/







------------------------------

_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/

End of Corvanatics Digest, Vol 50, Issue 1
******************************************




_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/