[FC] Getting the ignition switch out of the dash

[J R Read_HML]

Oooops.  That is the usual question - and I'm tired.  SORRY!
Later, JR

----- Original Message ----- 
From: "Bryan Blackwell" <bryan at skiblack.com>
To: "J R Read_HML" <hmlinc at sbcglobal.net>
Cc: "Corvanatics" <corvanatics at corvair.org>
Sent: Tuesday, November 03, 2009 9:32 PM
Subject: Re: [FC] Getting the ignition switch out of the dash


> Don't listen to him, that's how you take the headlight switch out :-)
>
> Yes, the ring unscrews once you take the lock out.
>
> --Bryan
>
> On Nov 3, 2009, at 10:26 PM, J R Read_HML wrote:
>
>> Behind the dash and on top of the switch is a button.  Push it down
>> while
>> pulling the stem/knob out from the front.  You have to take that out
>> before
>> you can get the bezel off.
>>
>> Later, JR
>>
>> ----- Original Message -----
>> From: "Steve Turner" <imakarknut at yahoo.com>
>> To: "Corvanatics" <corvanatics at corvair.org>
>> Sent: Tuesday, November 03, 2009 9:24 PM
>> Subject: [FC] Getting the ignition switch out of the dash
>>
>>
>> Hello; A friend told me how to remove the lock cylinder from the
>> ignition
>> switch but I also need to remove the entire ignition switch. Does
>> the chrome
>> ring unscrew so the switch can be taken out from behind the dash or
>> what? I
>> can't find anything about it in my repair books. Many thanks! Steve
>> T. (61
>> Rampside, 61 Lakewood)
>
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/