[FC] Getting the ignition switch out of the dash

[Bryan Blackwell]

Don't listen to him, that's how you take the headlight switch out :-)

Yes, the ring unscrews once you take the lock out.

--Bryan

On Nov 3, 2009, at 10:26 PM, J R Read_HML wrote:

> Behind the dash and on top of the switch is a button.  Push it down  
> while
> pulling the stem/knob out from the front.  You have to take that out  
> before
> you can get the bezel off.
>
> Later, JR
>
> ----- Original Message -----
> From: "Steve Turner" <imakarknut at yahoo.com>
> To: "Corvanatics" <corvanatics at corvair.org>
> Sent: Tuesday, November 03, 2009 9:24 PM
> Subject: [FC] Getting the ignition switch out of the dash
>
>
> Hello; A friend told me how to remove the lock cylinder from the  
> ignition
> switch but I also need to remove the entire ignition switch. Does  
> the chrome
> ring unscrew so the switch can be taken out from behind the dash or  
> what? I
> can't find anything about it in my repair books. Many thanks! Steve  
> T. (61
> Rampside, 61 Lakewood)