[FC] stuck jets

[Ken Hand]

 I have actually split the jets this way and then had to drill and tap.

 

Ken Hand
248-613-8586
www.corvairmechanic.com
 

 

-----Original Message-----
From: Dennis Pleau <dpleau at wavecable.com>
To: corvanatics at corvair.org
Sent: Sun, Mar 21, 2010 8:54 pm
Subject: Re: [FC] stuck jets


Set the carb base on a solid surface such as an anvil or the back of a vice.
Put a cheap screwdriver in the jet slot and hit it hard with a hammer a few
times and the jet will screw right out.

dp

-----Original Message-----
From: corvanatics-bounces at corvair.org
[mailto:corvanatics-bounces at corvair.org] On Behalf Of Wild8bill at aol.com
Sent: Sunday, March 21, 2010 5:44 PM
To: corvanatics at corvair.org
Subject: [FC] stuck jets


Any tips to remove main jets that are stuck  tight?
 
I think part of my stalling and stuttering  problem when I first give it 
gas are the 52 jets the P/O stuck in there. Seems a  little excessive for an

80hp motor.
 
Bill
Richmond,  CA


_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/