[FC] Andrew's Air Cleaner

Chris & Bill Strickland lechevrier at earthlink.net
Mon Sep 20 14:51:25 EDT 2010


>Perhaps the FC crossover we are familiar with was a running change?  Finding another one without the silencer on it would seem to suggest this.
>

Having looked at the picture and realizing it did not look unfamiliar, I 
believe this is likely. I may have one somewhere in the "collection", 
but it is not practical to look for it specifically.  Figure 6A-112 in 
the 61 Shop Manual may also suggest this. The pic in my copy is Very 
Dark, but that cross pipe looks very narrow, too narrow to have the 
"silencer" on it, and no indication of the ends of the silencer section 
-- also note the choke cables. Also, it may not be a "silencer" as much 
as a modification to combat carb icing by moving the air intake further 
away from the fan inlet. Perhaps in concert with the trapezoidal "air 
baffle" piece by the carbs.  The outline drawing in Fig 2-33 (wagon) 
appears to also show this unshielded cross tube with the center 
"cut-out", as does Fig 2-34 (FC).

So, my question is, "Should the 'silencer / anti-icer' go to the front 
or the rear?"  Perhaps it only fits one way ...

Bill Strickland


More information about the Corvanatics mailing list