[FC] Corvanatics Digest, Vol 149, Issue 2

Fred Adler fadler at genbio.com
Mon Aug 7 12:01:24 EDT 2017 

Thanks Steve.

Fred

-----Original Message-----
From: Corvanatics [mailto:corvanatics-bounces at corvair.org] On Behalf Of corvanatics-request at corvair.org
Sent: Monday, August 07, 2017 9:00 AM
To: corvanatics at corvair.org
Subject: Corvanatics Digest, Vol 149, Issue 2

Send Corvanatics mailing list submissions to
	corvanatics at corvair.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://www.vv.corvair.org/mailman/listinfo/corvanatics
or, via email, send a message with subject or body 'help' to
	corvanatics-request at corvair.org

You can reach the person managing the list at
	corvanatics-owner at corvair.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of Corvanatics digest..."


Today's Topics:

   1. Re: Corvanatics Digest, Vol 149, Issue 1 (Steve Spilatro)


----------------------------------------------------------------------

Message: 1
Date: Sun, 6 Aug 2017 23:33:57 +0000
From: Steve Spilatro <spilatrs at marietta.edu>
To: "corvanatics at corvair.org" <corvanatics at corvair.org>, Fred Adler
	<fadler at genbio.com>
Subject: Re: [FC] Corvanatics Digest, Vol 149, Issue 1
Message-ID:
	<SN2PR03MB2159E57A59D9817000FC5292A1B40 at SN2PR03MB2159.namprd03.prod.outlook.com>
	
Content-Type: text/plain; charset="iso-8859-1"

The repro handles from Clarks (and maybe elsewhere) do not fit the same as the original GM handles on deluxe FCs because the splines in the handle do not extend as far outward and thus do not grip the shaft as well. This is only a problem with deluxe FC because the vinyl pads do not allow the handles to be pushed on as far;  I had to replace all the repro handles with stock ones.

Steve


________________________________
From: Corvanatics <corvanatics-bounces at corvair.org> on behalf of corvanatics-request at corvair.org <corvanatics-request at corvair.org>
Sent: Sunday, August 6, 2017 12:00 PM
To: corvanatics at corvair.org
Subject: Corvanatics Digest, Vol 149, Issue 1

Send Corvanatics mailing list submissions to
        corvanatics at corvair.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://www.vv.corvair.org/mailman/listinfo/corvanatics
Corvanatics Info Page<http://www.vv.corvair.org/mailman/listinfo/corvanatics>
www.vv.corvair.org
This list supports the Corvanatics chapter of the Corvair Society of America. It is for discussion on all Corvair Forward Control vehicles - Corvans, Greenbriers ...


or, via email, send a message with subject or body 'help' to
        corvanatics-request at corvair.org

You can reach the person managing the list at
        corvanatics-owner at corvair.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of Corvanatics digest..."


Today's Topics:

   1. Window cranks (Fred Adler)
   2. Re: Window cranks (N2VZD at aol.com)


----------------------------------------------------------------------

Message: 1
Date: Sat, 5 Aug 2017 22:42:15 +0000
From: Fred Adler <fadler at genbio.com>
To: "corvanatics at corvair.org" <corvanatics at corvair.org>
Subject: [FC] Window cranks
Message-ID:
        <MWHPR04MB04304C24F0E11F1EE1293DBCA5B70 at MWHPR04MB0430.namprd04.prod.outlook.com>

Content-Type: text/plain; charset="iso-8859-1"

OK, I have tried a variety of window cranks and bottom line is I cannot get them tight enough to stay on.  First the darn screw is too inaccessible when you put on the crank to tighten, yes I have padded door cards, and second the end of the regulator sticking out of the door is chewed up.  Any suggestions as to a good crank and where to get it.  I bought the ones from Clark and no dice.........same problem.


Thanks,


Fred Adler

1961 Rampside


------------------------------

Message: 2
Date: Sat, 5 Aug 2017 21:10:54 -0400
From: N2VZD at aol.com
To: fadler at genbio.com, corvanatics at corvair.org
Subject: Re: [FC] Window cranks
Message-ID: <1e0f6e.373b3051.46b7c69e at aol.com>
Content-Type: text/plain; charset="US-ASCII"

IF you have Deluxe door panels without the correct regulator and door actuator assemblies (with longer shaft)  it about impossible to put the  handles on.  So you probably need parts...
Regards, Tim Colson


In a message dated 8/5/2017 6:42:40 P.M. Eastern Daylight Time, corvanatics at corvair.org writes:

OK, I  have tried a variety of window cranks and bottom line is I cannot get them  tight enough to stay on.  First the darn screw is too inaccessible when  you put on the crank to tighten, yes I have padded door cards, and second the  end of the regulator sticking out of the door is chewed up.  Any suggestions as to a good crank and where to get it.  I bought the ones  from Clark and no dice.........same  problem.


Thanks,


Fred Adler

1961  Rampside
_______________________________________________
Corvanatics  mailing  list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
Corvanatics Info Page<http://www.vv.corvair.org/mailman/listinfo/corvanatics>
www.vv.corvair.org
This list supports the Corvanatics chapter of the Corvair Society of America. It is for discussion on all Corvair Forward Control vehicles - Corvans, Greenbriers ...


This  list sponsored by the Corvair Society of America, http://www.corvair.org/ [https://www.corvair.org/media/k2/items/cache/d9b208614500b6f80739755fd29fad52_M.jpg]<http://www.corvair.org/>

Welcome!<http://www.corvair.org/>
www.corvair.org
Enjoy our public web pages!  This is the official website of the Corvair Society of America!  Topics include CORSA facts, CORSA event calend...





------------------------------

Subject: Digest Footer

_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
Corvanatics Info Page<http://www.vv.corvair.org/mailman/listinfo/corvanatics>
www.vv.corvair.org
This list supports the Corvanatics chapter of the Corvair Society of America. It is for discussion on all Corvair Forward Control vehicles - Corvans, Greenbriers ...


This list sponsored by the Corvair Society of America, http://www.corvair.org/ [https://www.corvair.org/media/k2/items/cache/d9b208614500b6f80739755fd29fad52_M.jpg]<http://www.corvair.org/>

Welcome!<http://www.corvair.org/>
www.corvair.org
Enjoy our public web pages!  This is the official website of the Corvair Society of America!  Topics include CORSA facts, CORSA event calend...



------------------------------

End of Corvanatics Digest, Vol 149, Issue 1
*******************************************


------------------------------

Subject: Digest Footer

_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/

------------------------------

End of Corvanatics Digest, Vol 149, Issue 2
*******************************************

More information about the Corvanatics mailing list