[NoVa-Corvairs] Early Model Engine Removal

[Curtis Shimp]

Bryan:

Thanks for the quick response.  Much appreciated.

Curt

On Fri, 28 Sep 2007 19:47:59 -0400 Bryan Blackwell <bryan at skiblack.com>
writes:
> Hi Curt,
> 
> They should slide right out.  It's just like an LM without the 
> center  
> bolt.
> 
> --Bryan
> 
> On Sep 28, 2007, at 7:03 PM, Curtis Shimp wrote:
> 
> > For the first time in my life I am going to help take an early 
> model
> > engine out.  Question about the axles.  I assume that you have to 
> take
> > the wheel and brakes off and unbolt the backing plate and pull on 
> the
> > axles so that the short spine shaft comes out of the diff.  If 
> that is
> > correct how hard is it to pull these freed axles from the diff.   
> > Can it
> > be easily done by hand or do you need any special tools?
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>