[NoVa-Corvairs] Early Model Engine Removal

[Bryan Blackwell]

Hi Curt,

They should slide right out.  It's just like an LM without the center  
bolt.

--Bryan

On Sep 28, 2007, at 7:03 PM, Curtis Shimp wrote:

> For the first time in my life I am going to help take an early model
> engine out.  Question about the axles.  I assume that you have to take
> the wheel and brakes off and unbolt the backing plate and pull on the
> axles so that the short spine shaft comes out of the diff.  If that is
> correct how hard is it to pull these freed axles from the diff.   
> Can it
> be easily done by hand or do you need any special tools?