[NoVa-Corvairs] Early rear wheel cyl removal

[Bryan Blackwell]

That's how the late models are, but the earlies use the pivot bolt to  
retain the cylinder.  I suspect it's held in there by corrosion, but  
I want to be sure before using too much force.

--Bryan

On Feb 2, 2009, at 10:49 AM, Dennis Ward wrote:

> I seem to recall 2 securing bolts for each cylinder (rear only).
> I also seem to recall that the tolerance between the wheel cylinder  
> and the
> hole in the backing plate is pretty tight, so any corrosion tends to
> prevent it's easy removal. PB blaster to the rescue
>
> Dennis.