[NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale

Justin jp0181 at yahoo.com
Thu Jun 6 11:17:51 EDT 2013


Thank you, Darrin. Like to replace one fuel line from the left carb and install my original oil cooler back on also. I have 5 quarts of vr1 oil 10w30

J. Smalley


On Jun 6, 2013, at 10:43 AM, Darrin Hartzler <dhartzler at ifc.org> wrote:

> Justin,
> 
> Sorry, but my wife it out til next Friday and last weeks of school...so 
> fully booked and then off to Portland and Alaska...back on July 1st...here 
> for a week and then Paris.   Maybe a weekend day in early July would be 
> good for me. 
> 
> Replacing a head is not so daunting...just lots of parts to remove on the 
> top of the engine as well as the carb studs if doing it in the car.  Start 
> spraying penetrant on the top stud nuts on that side now...the ones that 
> you can see just above the valve cover on that head.     That will help. 
> You will need exhaust donuts for that side as well as the crossover 
> (likely), head gaskets (just use stock steel ones), carb base gaskets. May 
> want to replace the o-rings on the pushrod tubes on that side if you have 
> not done this yet.  What am I forgetting gents?
> 
> 1960 80 HP heads should be very inexpensive unless rebuilt.   When I did a 
> 61 80 HP motor a few years ago I found two NOS heads, one for $30 and the 
> other for $50...had to add valves and springs though.   Good used head 
> from Greg is a good bet.
> 
> Darrin
> 
> ____________________________________________________________________________________________
> Darrin Hartzler 
> Global Manager, Corporate Governance
> IFC Corporate Governance Group
> 2121 Pennsylvania Ave., NW 
> Washington, DC 20433 
> Tel: +1 (202) 473-0027 Fax: +1 (202) 522-1604 
> E-mail: dhartzler at ifc.org Web: www.ifc.org/corporategovernance 
> 
> IFC is a member of the World Bank Group
> 
> Reduce your environmental footprint. Print only if necessary.
> 
> 
> 
> From:
> Justin <jp0181 at yahoo.com>
> To:
> Northern Va Corvair Club <novacc-list at corvair.org>
> Date:
> 06/06/2013 07:36 AM
> Subject:
> Re: [NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale
> 
> 
> 
> The next two to three weeks would be great. The weekend of the 21.22nd of 
> June. Let me know.
> 
> J. Smalley
> 
> 
> On Jun 6, 2013, at 6:00 AM, Darrin Hartzler <dhartzler at ifc.org> wrote:
> 
>> 
>> Lift would be great!
>> 
>> I would not need pay to help, just need to find the time.
>> 
>> Darrin
>> 
>> Sent from my iPhone
>> 
>> On Jun 5, 2013, at 9:52 PM, "mike runnels" <mrunnels at verizon.net> wrote:
>> 
>>> Yeah we can it here at my house on the lift..:) I would recommend
> having
>> one of the guys who knows the ins and outs of doing it better than me to
>> come and assist. But I have lift and tools..
>>> 
>>> 
>>> -----Original Message-----
>>> From: novacc-list-bounces at corvair.org
>> [mailto:novacc-list-bounces at corvair.org] On Behalf Of Justin
>>> Sent: Wednesday, June 05, 2013 9:12 PM
>>> To: Northern Va Corvair Club
>>> Subject: Re: [NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale
>>> 
>>> Mike you offering an install were your at? I'm will to pay some members
>> if I have to.
>>> 
>>> J. Smalley
>>> 
>>> 
>>> On Jun 5, 2013, at 8:48 PM, "mike runnels" <mrunnels at verizon.net>
> wrote:
>>> 
>>>> I have a trailer....we can do it here, or take it up there...
>>>> 
>>>> Mike
>>>> 
>>>> -----Original Message-----
>>>> From: novacc-list-bounces at corvair.org
>> [mailto:novacc-list-bounces at corvair.org] On Behalf Of Justin
>>>> Sent: Wednesday, June 05, 2013 8:36 PM
>>>> To: Northern Va Corvair Club
>>>> Subject: Re: [NoVa-Corvairs] 1960 Corvair 700 Coupe For Sale
>>>> 
>>>> I don't have another head as of yet. What else would be required to
>> install ? You have a list such as gaskets, bolts and etc. Jeff has his
>> hands full right now and the tow up there is not worth the hassle. I had
>> $1300 worth of work completed up there and resist to go up there back
> and
>> forth, lol.
>>>> 
>>>> J. Smalley
>>>> 
>>>> 
>>>> On Jun 5, 2013, at 8:03 PM, Greg Walthour <05polarexpress at cox.net>
>> wrote:
>>>> 
>>>>> Do you already have another head?  I'm sure I have an extra good '60
>> head around?
>>>>> 
>>>>> On Jun 5, 2013, at 7:27 PM, Justin wrote:
>>>>> 
>>>>>> Along with this post, do I want to let the car go? No! If I can get
>> the head and the gaskets to replace with help perhaps I may keep it. If
>> not, I'm selling or it will sit until further notice.
>>>>>> 
>>>>>> 
>>>>>> J. Smalley
>>>>>> 
>>>>>> 
>>>>>> On Jun 5, 2013, at 6:37 PM, Justin <jp0181 at yahoo.com> wrote:
>>>>>> 
>>>>>>> To All,
>>>>>>> 
>>>>>>> The left head 4th cylinder spark plug hole is beyond tapping,
>> inserting and etc. the left head needs to be replaced. At this juncture
> I
>> have priced the labor and replacement here locally and its beyond what I
>> want to spend right now. I wanted to have this issue resolved
> permanently
>> in time for the Corsa Convention. I have some other things I'm taking
> care
>> of right now and offering the car up for $2,500 as is. It still runs on
> 5
>> cylinder along with many other upgrades like alternator, tires and CD
>> player. The gas heater works among other things to long to list. If
>> interested, please email or call me at 757-353-2243. It's currently down
>> the street from me at a shop I had looking at the spark plug hole. I
> have
>> the title and would need to be notarized. Please let me know if your
>> interested. Other than the head the car runs like a champ.
>>>>>>> Ill just have to purchase me another one in the future.
>>>>>>> 
>>>>>>> J. Smalley
>>>>>>> 
>>>>>>> 
>>>>>>> On Jun 5, 2013, at 6:06 PM, Justin <jp0181 at yahoo.com> wrote:
>>>>>>> 
>>>>>>>> Perhaps if i don't get any responses back ill just sell the car.
>>>>>>>> 
>>>>>>>> J. Smalley
>>>>>>>> 
>>>>>>>> 
>>>>>>>> On Jun 5, 2013, at 5:24 PM, Justin <jp0181 at yahoo.com> wrote:
>>>>>>>> 
>>>>>>>>> Would anyone in the club be willing help me replace my left
>> cylinder head?
>>>>>>>>> I'm willing to do it myself instead of paying more than my car is
>> worth to do so.
>>>>>>>>> 
>>>>>>>>> 4th spark plug hole integrity is shot.
>>>>>>>>> 
>>>>>>>>> J. Smalley
>>>>>>>> _______________________________________________
>>>>>>>> Novacc-list mailing list
>>>>>>>> Novacc-list at corvair.org
>>>>>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>>>>> _______________________________________________
>>>>>>> Novacc-list mailing list
>>>>>>> Novacc-list at corvair.org
>>>>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>>>> _______________________________________________
>>>>>> Novacc-list mailing list
>>>>>> Novacc-list at corvair.org
>>>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>>> 
>>>>> _______________________________________________
>>>>> Novacc-list mailing list
>>>>> Novacc-list at corvair.org
>>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>> _______________________________________________
>>>> Novacc-list mailing list
>>>> Novacc-list at corvair.org
>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>>> 
>>>> _______________________________________________
>>>> Novacc-list mailing list
>>>> Novacc-list at corvair.org
>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>> _______________________________________________
>>> Novacc-list mailing list
>>> Novacc-list at corvair.org
>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>> 
>>> _______________________________________________
>>> Novacc-list mailing list
>>> Novacc-list at corvair.org
>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>> _______________________________________________
>> Novacc-list mailing list
>> Novacc-list at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
> 
> 
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list


More information about the Novacc-list mailing list