[NoVa-Corvairs] Fwd: '60 Fuel Pump

[Pete Faulkner]

Justin,

You ate welcome to either. 

Best,

Pete

-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 71863 bytes
Desc: not available
Url : http://www.vv.corvair.org/pipermail/novacc-list/attachments/20130313/bd7584da/attachment-0001.jpeg 
-------------- next part --------------


Sent from my iPhone

On Mar 13, 2013, at 10:11 PM, "Justin" <jp0181 at yahoo.com> wrote:

> Thanks Ron!
> 
> J. Smalley
> 
> 
> On Mar 13, 2013, at 10:08 PM, Ron Tumolo <rvtum522 at gmail.com> wrote:
> 
>> Justin,
>> 
>> I just checked and I do not have a spare fuel pump pushrod.
>> 
>> R
>> 
>> On Wed, Mar 13, 2013 at 9:59 PM, Justin <jp0181 at yahoo.com> wrote:
>> 
>>> Anyone have an extra later pushrod with pin in case Ron and I cannot find
>>> one? Thank you! Need ASAP
>>> 
>>> J. Smalley
>>> 
>>> 
>>> Begin forwarded message:
>>> 
>>>> From: Ron Tumolo <rvtum522 at gmail.com>
>>>> Date: March 13, 2013, 9:14:07 PM EDT
>>>> To: Greg Walthour <05polarexpress at cox.net>
>>>> Cc: Justin Paul <jp0181 at yahoo.com>
>>>> Subject: Re: '60 Fuel Pump
>>>> 
>>>> Thanks Greg...I was thinking the shaft from the fuel pump had to be
>>> removed.  Justin will need a 61-69 push rod.  I'll check tonight to see if
>>> I have a spare.
>>>> 
>>>> Ron
>>>> On Wed, Mar 13, 2013 at 8:25 PM, Greg Walthour <05polarexpress at cox.net>
>>> wrote:
>>>>> Hey, Guys!  You should be able to use the later '61-69 style pump;
>>> however, you must also use the later push rod.  You should be able to pull
>>> the rod (with the spring on top) with a pair of needle nose pliers.  It is
>>> a snug fit.  A "cam" on the crankshaft makes it move up and down.  It
>>> should slide out with a little pressure. When you have the '60 push rod
>>> out, you should be able to see the difference in the length when comparing
>>> it to the later push rod.  I hope this is clear and helps!  Good luck!  Greg
>>>>> 
>>>>> On Mar 13, 2013, at 7:49 PM, Justin wrote:
>>>>> 
>>>>>> Greg,
>>>>>> 
>>>>>> Do you have a extra 60 fuel pump? I can get ASAP or can tell me how
>>> to replace the pushrod out to fit in a later model pump?! I have the old
>>> one taken apart. And the pushrod and rubber piece around it. How do I just
>>> use the pushrod? And install in the new pump Ron have me? He was helping me
>>> today after work. We stuck
>>>>>> 
>>>>>> J. Smalley
>>> _______________________________________________
>>> Novacc-list mailing list
>>> Novacc-list at corvair.org
>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>> _______________________________________________
>> Novacc-list mailing list
>> Novacc-list at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list