[NoVa-Corvairs] Fwd: '60 Fuel Pump

[Justin]

Since Ron has given me the later model pump assume I need the taller one correct? How much do I owe you and when tmrw can I pick them or the one I need up? Ron will help me put it in tmrw. Ron is this good?! Thank you Pete. Just need your address 

J. Smalley


On Mar 13, 2013, at 10:32 PM, Pete Faulkner <peterdfaulkner at msn.com> wrote:

> Justin,
> 
> You ate welcome to either. 
> 
> Best,
> 
> Pete
> 
> <image.jpeg>
> 
> 
> Sent from my iPhone
> 
> On Mar 13, 2013, at 10:11 PM, "Justin" <jp0181 at yahoo.com> wrote:
> 
>> Thanks Ron!
>> 
>> J. Smalley
>> 
>> 
>> On Mar 13, 2013, at 10:08 PM, Ron Tumolo <rvtum522 at gmail.com> wrote:
>> 
>>> Justin,
>>> 
>>> I just checked and I do not have a spare fuel pump pushrod.
>>> 
>>> R
>>> 
>>> On Wed, Mar 13, 2013 at 9:59 PM, Justin <jp0181 at yahoo.com> wrote:
>>> 
>>>> Anyone have an extra later pushrod with pin in case Ron and I cannot find
>>>> one? Thank you! Need ASAP
>>>> 
>>>> J. Smalley
>>>> 
>>>> 
>>>> Begin forwarded message:
>>>> 
>>>>> From: Ron Tumolo <rvtum522 at gmail.com>
>>>>> Date: March 13, 2013, 9:14:07 PM EDT
>>>>> To: Greg Walthour <05polarexpress at cox.net>
>>>>> Cc: Justin Paul <jp0181 at yahoo.com>
>>>>> Subject: Re: '60 Fuel Pump
>>>>> 
>>>>> Thanks Greg...I was thinking the shaft from the fuel pump had to be
>>>> removed.  Justin will need a 61-69 push rod.  I'll check tonight to see if
>>>> I have a spare.
>>>>> 
>>>>> Ron
>>>>> On Wed, Mar 13, 2013 at 8:25 PM, Greg Walthour <05polarexpress at cox.net>
>>>> wrote:
>>>>>> Hey, Guys!  You should be able to use the later '61-69 style pump;
>>>> however, you must also use the later push rod.  You should be able to pull
>>>> the rod (with the spring on top) with a pair of needle nose pliers.  It is
>>>> a snug fit.  A "cam" on the crankshaft makes it move up and down.  It
>>>> should slide out with a little pressure. When you have the '60 push rod
>>>> out, you should be able to see the difference in the length when comparing
>>>> it to the later push rod.  I hope this is clear and helps!  Good luck!  Greg
>>>>>> 
>>>>>> On Mar 13, 2013, at 7:49 PM, Justin wrote:
>>>>>> 
>>>>>>> Greg,
>>>>>>> 
>>>>>>> Do you have a extra 60 fuel pump? I can get ASAP or can tell me how
>>>> to replace the pushrod out to fit in a later model pump?! I have the old
>>>> one taken apart. And the pushrod and rubber piece around it. How do I just
>>>> use the pushrod? And install in the new pump Ron have me? He was helping me
>>>> today after work. We stuck
>>>>>>> 
>>>>>>> J. Smalley
>>>> _______________________________________________
>>>> Novacc-list mailing list
>>>> Novacc-list at corvair.org
>>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>>> _______________________________________________
>>> Novacc-list mailing list
>>> Novacc-list at corvair.org
>>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>> _______________________________________________
>> Novacc-list mailing list
>> Novacc-list at corvair.org
>> http://www.vv.corvair.org/mailman/listinfo/novacc-list
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list