[NoVa-Corvairs] Oil cooler seals

[A.L. CRAMP]

NO!  But you want to make sure every thing is dry and not oily.   If you have some Syl-glide (Silicone Grease) or some of the similar silicone grease that comes in small packets for disc brakes.   Just need a little to help it seat.   The compression and plyability of the rubber is what keeps it from leaking.   Also:  If you can, use a tourqe wrench and tightnen to the factory inch lbs setting.  Try not to over tighten.    Always worked for me.
 
-- Lee Cramp
 
Date: Wed, 20 Aug 2014 18:39:19 +0000
To: novacc-list at corvair.org
Subject: [NoVa-Corvairs] Oil cooler seals
From: novacc-list at corvair.org

Do I need to put Form-A-Gasket Sealant on the O rings on the Oil Cooler when installing a

Oil Cooler
Thanks
Richard
_______________________________________________
Novacc-list mailing list
Novacc-list at corvair.org
http://www.vv.corvair.org/mailman/listinfo/novacc-list 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vv.corvair.org/pipermail/novacc-list/attachments/20140820/be0269f8/attachment.html>