[NoVa-Corvairs] Need some Chevy knowledge.

[Lawrence Brent]

go to(small block chevy starter wiring) this will show starter and selenoid
short between hot post and small post this should engage selenoid thence
starter.       ldbrentjr at gmail.com

On Fri, Jun 2, 2017 at 8:55 AM, A.L. CRAMP via Novacc-list <
novacc-list at corvair.org> wrote:

> Hey All,
>
>
> If any one out there can tell me how to Hot wire the Starter on my 1986
> Chevy v-8 Truck pleas e let me know.  Just need to know what wire needs to
> go where underneath to see if the starter will turn over with the ignition
> on.  Ignition lights all bright, Battery tests strong, just not power to
> starter or starter is bad.  No solidi click. Nothing.  So just want to see
> if starter works before I assume it is the Starter and change it when if
> may be the Starter switch or another wire.
>
>
> I figure there might be some late small block guys out there.  Looking for
> the Shop Manuel which may help me figure it out.  But electrical stuff is
> not my Best talent.
>
>
>
> Thanks much for whatever info you can give.   Those going have a great
> time at the Vair Fair.
>
>
> --Lee Cramp - 240-704-5479 <(240)%20704-5479>
>
> _______________________________________________
> Novacc-list mailing list
> Novacc-list at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/novacc-list
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vv.corvair.org/pipermail/novacc-list/attachments/20170602/fba8a7e4/attachment-0001.html>