[NoVa-Corvairs] Noob May Need a Good Used Head

[Bryan Blackwell]

Remove the top shroud and side shroud.  You are following the shop manual procedure, correct?

--Bryan

> On Mar 6, 2017, at 6:09 PM, Dan Weiss <dkakd at aol.com> wrote:
> 
> I cannot for the life of me figure out how to remove the heater hose shroud that was hiding the number.  I removed the bottom corner bolt and the bolt inside the housing, but there does not seem enough clearance for either a ratchet or box end wrench.  Any tips?  
>