[PPCC] Valve Job 110/PG

[Randall Karl]

For a while I Suspected something was going on with the left bank.  Friday I
ran it and it was running worse than normal.  Checked vacuum and needle was
bouncing wildly from 0 to 15.  #2 intake rocker was off the valve.
Readjusted valves to find two bent push rods on #4 and #6 Intake.  #4 and #6
Intake valves are stuck closed.  Could tap #4 open but it stayed open and
#6 will not budge!  Pulled head for a closer look and tried again.  Same
results.  I believe my options are;  a complete valve job (including valve
guides) on this head or replace it with a used serviceable head.  

Anyone have a good 110 left head for sale?

 

Randy Karl

Colorado Springs

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/ppcc-list/attachments/20130707/a0d1f542/attachment.html