[PPCC] New member, looking for some advice

[rearengine.steve]

If you mean the countershaft rollers there are 92.  There are also 33 in one row and 37 in the second row inside the clutch gear.  Look at wear on shift forks. Remember shift interlock pin. Polish shift rails.  
Tools include snap ring pliers in several varieties including one pair that I modified to work easier plus pin punches and drifts and for your first time a dummy shaft for loading the rows of rollers. Plus you need a press and various plates to aid in removal of gear stack from mainshaft and pipe of various lengths and diameters to assemble the gear stack.  
Cleaning is the most important and time consuming. Good luck.
Steve

Sent from my T-Mobile 4G LTE Device-------- Original message --------From: n00n3r via PPCC-list <ppcc-list at corvair.org> Date: 03/11/2016  5:11 PM  (GMT-07:00) To: ppcc-list at corvair.org Subject: [PPCC] New member, looking for some advice 
I'm looking forward to meeting all of you- but here is the important stuff:  I'm working on a1963 Spyder!  I need to replace the 96 roller bearings in the transmission... armed with the shop mamual, I'm diving in this weekend.  Anybody have any tips for working on the 4 speed?
Chris Newnan


Sent from my Sprint Samsung Galaxy Note5.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vv.corvair.org/pipermail/ppcc-list/attachments/20160311/c76f3180/attachment.html>