PPCC List - RMC List - Early engine parts for sale

[Steve Goodman V]

Hello all:  this is curious because I sent this on March 3 and it was on
the list very soon after that.

Now on March 5 it appears again. I did NOT resend the post.

Goofy email stuff

Steve

On Wed, Mar 5, 2025, 7:48 PM Steve Goodman V via RMC-List <
rmc-list at corvair.org> wrote:

> Hello all:  is anyone planning to build a 145ci engine?  I have the
> following:
>
> 6 Clark's full fin STD cyl w280 hone
> #11623. 280 hone is for moly rings
>
> 6 Clark's premium cast STD pistons #1435
>
> 1 set Hastings STD moly rings Clark's
> #8202
>
> 1 set (12) Clark's lifters #237AX
>
> All of the above is new and in the boxes
>
> Last is early FC case halves clean to a point but sealer in places. BIG
> DEAL is all of the head studs have been removed. All threads look ok but
> time consuming to work with the repair.  FC/station wagon case halves with
> the oil fill/dipstick tube out the back are getting harder to find. With
> work the case halves can be clearanced for the late crankshaft too.
>
> If someone buys the new parts I will include the case halves.
>
> Total from Clark's for the above new parts is $998.00. That does NOT
> include shipping or the fitting of the rods.
>
> I am looking for $850.00 or close to that for everything.
>
> Call the shop if you are interested
> 303.278.4889
>
> Thanks
> Steve
> _______________________________________________
> This message was sent by the RMCs mailing list, all copyrights are the
> property of the writer, please attribute properly.
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vv.corvair.org/pipermail/ppcc-list/attachments/20250305/a0dc4919/attachment.html>