[SCG] Tunnel pan screws

[Richard W Thompson]

Doug,

I believe they are hex head sheetmetal screws, clear zinc plated, no slots
for a screwdriver in the head, but has a wide washer at the bottom of the
head. #10 screw, 1/2". My '65 convertible, an later April '65 car, has
these screws and was a low, 39K mile unmolested car.

What does the drawing look like for attaching screws in the Assembly
Manual? It might give a rough representation of it.

Best Regards,

Rich


                                                                           
             Barneck Doug C                                                
             TIGTA                                                         
             <Doug.Barneck at tig                                          To 
             ta.treas.gov>             "'scg-list at tiger.skiblack.com'"     
             Sent by:                  <scg-list at tiger.skiblack.com>       
             scg-list-bounces@                                          cc 
             tiger.skiblack.co                                             
             m                                                     Subject 
                                       [SCG] Tunnel pan screws             
                                                                           
             12/07/2005 07:32                                              
             PM                                                            
                                                                           
                                                                           
                                                                           




I am working on a very early 66 corsa, sept 65.  What should the tunnel pan
screws look like?
Thanks
DougBarneck This message was sent by the SCG-list mailing list, all
copyrights are the property
of the writer, please attribute properly. For help,
mailto:scg-list-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: SCG-list at tiger.skiblack.com
Change your options: http://www.vv.corvair.org/mailman/options/scg-list
Get further information about SCG at
http://members.cox.net/whubbell/Stock%20Corvair%20Group/Hello%20to%20all%20new%20and%20prior%20members.htm


This communication is for use by the intended recipient and contains
information that may be Privileged, confidential or copyrighted under
applicable law. If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this e-mail,
in whole or in part, is strictly prohibited. Please notify the sender by
return e-mail and delete this e-mail from your system. Unless explicitly
and conspicuously designated as "E-Contract Intended", this e-mail does
not constitute a contract offer, a contract amendment, or an acceptance
of a contract offer. This e-mail does not constitute a consent to the
use of sender's contact information for direct marketing purposes or for
transfers of data to third parties.

Francais Deutsch Italiano  Espanol  Portugues  Japanese  Chinese  Korean

           http://www.DuPont.com/corp/email_disclaimer.html