[SCG] Tunnel pan screws

[Larry Claypool]

forgot to add- it's a 1/4" hex
larry
----- Original Message ----- 
From: "Larry Claypool" <mr.vair at urbancom.net>
To: "Richard W Thompson" <Richard.W.Thompson at usa.dupont.com>; "Barneck Doug 
C TIGTA <Doug.Barneck" <Doug.Barneck at tigta.treas.gov>
Cc: <scg-list at tiger.skiblack.com>; <scg-list-bounces at tiger.skiblack.com>
Sent: Thursday, December 08, 2005 6:48 AM
Subject: Re: [SCG] Tunnel pan screws


> doug- rich's assessment  is what i have found as well
> regards
> larry claypool
> ----- Original Message ----- 
> From: "Richard W Thompson" <Richard.W.Thompson at usa.dupont.com>
> To: "Barneck Doug C TIGTA <Doug.Barneck" <Doug.Barneck at tigta.treas.gov>
> Cc: <scg-list at tiger.skiblack.com>; <scg-list-bounces at tiger.skiblack.com>
> Sent: Wednesday, December 07, 2005 9:19 PM
> Subject: Re: [SCG] Tunnel pan screws
>
>
>>
>>
>>
>>
>> Doug,
>>
>> I believe they are hex head sheetmetal screws, clear zinc plated, no 
>> slots
>> for a screwdriver in the head, but has a wide washer at the bottom of the
>> head. #10 screw, 1/2". My '65 convertible, an later April '65 car, has
>> these screws and was a low, 39K mile unmolested car.
>>
>> What does the drawing look like for attaching screws in the Assembly
>> Manual? It might give a rough representation of it.
>>
>> Best Regards,
>>
>> Rich
>>
>>
>>
>>             Barneck Doug C
>>             TIGTA
>>             <Doug.Barneck at tig                                          To
>>             ta.treas.gov>             "'scg-list at tiger.skiblack.com'"
>>             Sent by:                  <scg-list at tiger.skiblack.com>
>>             scg-list-bounces@                                          cc
>>             tiger.skiblack.co
>>             m                                                     Subject
>>                                       [SCG] Tunnel pan screws
>>
>>             12/07/2005 07:32
>>             PM
>>
>>
>>
>>
>>
>>
>>
>> I am working on a very early 66 corsa, sept 65.  What should the tunnel 
>> pan
>> screws look like?
>> Thanks
>> DougBarneck This message was sent by the SCG-list mailing list, all
>> copyrights are the property
>> of the writer, please attribute properly. For help,
>> mailto:scg-list-help at corvair.org
>> This list sponsored by the Corvair Society of America,
>> http://www.corvair.org/
>> Post messages to: SCG-list at tiger.skiblack.com
>> Change your options: http://www.vv.corvair.org/mailman/options/scg-list
>> Get further information about SCG at
>> http://members.cox.net/whubbell/Stock%20Corvair%20Group/Hello%20to%20all%20new%20and%20prior%20members.htm
>>
>>
>> This communication is for use by the intended recipient and contains
>> information that may be Privileged, confidential or copyrighted under
>> applicable law. If you are not the intended recipient, you are hereby
>> formally notified that any use, copying or distribution of this e-mail,
>> in whole or in part, is strictly prohibited. Please notify the sender by
>> return e-mail and delete this e-mail from your system. Unless explicitly
>> and conspicuously designated as "E-Contract Intended", this e-mail does
>> not constitute a contract offer, a contract amendment, or an acceptance
>> of a contract offer. This e-mail does not constitute a consent to the
>> use of sender's contact information for direct marketing purposes or for
>> transfers of data to third parties.
>>
>> Francais Deutsch Italiano  Espanol  Portugues  Japanese  Chinese  Korean
>>
>>           http://www.DuPont.com/corp/email_disclaimer.html
>> This message was sent by the SCG-list mailing list, all copyrights are 
>> the property
>> of the writer, please attribute properly. For help, 
>> mailto:scg-list-help at corvair.org
>> This list sponsored by the Corvair Society of America, 
>> http://www.corvair.org/
>> Post messages to: SCG-list at tiger.skiblack.com
>> Change your options: http://www.vv.corvair.org/mailman/options/scg-list
>> Get further information about SCG at 
>> http://members.cox.net/whubbell/Stock%20Corvair%20Group/Hello%20to%20all%20new%20and%20prior%20members.htm
>>
>
> This message was sent by the SCG-list mailing list, all copyrights are the 
> property
> of the writer, please attribute properly. For help, 
> mailto:scg-list-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: SCG-list at tiger.skiblack.com
> Change your options: http://www.vv.corvair.org/mailman/options/scg-list
> Get further information about SCG at 
> http://members.cox.net/whubbell/Stock%20Corvair%20Group/Hello%20to%20all%20new%20and%20prior%20members.htm
>