[SCG] Battery hold down washers
Kent Sullivan
kentsu at corvairkid.com
Tue May 9 22:54:43 EDT 2006
Hi,
This item is listed in the Standard Stock catalogs for various years. P/N
446363 is in group 8.929. Its definition changes... I have copies of a few
of these catalogs and here's what they said:
*
1963 U.S.: 3/8" ID, 5/8" OD, 7/64" thick, plain steel
*
1965 Canadian: 3/8" ID, 7/8" OD, 3/32" thick, cad plated
*
1970 U.S.: 3/8" ID, 7/8" OD, 7/64" thick, plain steel
I think the "P" stands for "plate" but am not sure.
With all the variations in the part, I would expect the actual '65
production to have used different types, depending on what the factory could
get their hands on. Dave N. has some plant employees on tape saying when
they ran out of screws, etc. at Willow Run that they ran down to the local
hardware store and bought whatever was on hand!
--Kent
_____
From: scg-list-bounces at tiger.skiblack.com
[mailto:scg-list-bounces at tiger.skiblack.com] On Behalf Of Sam and Marissa
Andolino
Sent: Tuesday, May 09, 2006 1:22 PM
To: scg-list at tiger.skiblack.com
Subject: [SCG] Battery hold down washers
Hi everyone,
In the assembly manual for 65 it shows washers that go top of the J bolt
and under the head of the front battery hold down bolt. They call it a P
washer, anybody know what P washer is? On our very stock 65 there is one
thick 3/16 aluminum washer, could this be a P washer?
Thanks
Sam Andolino
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.vv.corvair.org/pipermail/scg-list/attachments/20060509/bf0016f0/attachment.htm
More information about the SCG-list
mailing list