[SCG] Window crank position

[Ronald Arndt]

Hi guys,

For what it's worth, my window handles are the way they came from the factory (have never been off).  Maybe it didn't matter to the workers how they put them on, but the driver's side is at 1:00, and the passenger side is at 10:00.

Ron 


On Thursday, August 28, 2014 9:48 AM, "corvairduval at cox.net" <corvairduval at cox.net> wrote:
  


I'm with you, Bill. 4:30 and 7:30. I've installed most GM handles this way.
I do check for interference with my knee cap. Straight ahead just does not
look right from a design standpoint. 68/9 being the exception, with the
redesign of the armrests, IIRC.

Frank DuVal

Original email:
-----------------
From: Bill Hubbell whubbell at verizon.net
Date: Thu, 28 Aug 2014 09:50:50 -0400
To: hmlinc at sbcglobal.net, scg-list at tiger.skiblack.com
Subject: Re: [SCG] Window crank position


The left handles should be in the 4-5 o'clock position with the window
fully rolled up.  The right handles should be in the 7-8 o'clock position. 

Bill Hubbell. 


On Aug 27, 2014, at 3:23 PM, "J. R. Read" <hmlinc at sbcglobal.net> wrote:

Where can I find info on correct window crank position - either at full up
or full down?  Fronts and rears the same?  2 or 4 door different for fronts
and rears?  I assume that left and right are different as well, but don't
know for certain.

Later, JR 

--------------------------------------------------------------------
myhosting.com - Premium Microsoft Windows and Linux web and application
hosting - http://link.myhosting.com/myhosting


This message was sent by the SCG-list mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:scg-list-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: SCG-list at tiger.skiblack.com
Change your options: http://www.vv.corvair.org/mailman/options/scg-list