[V8Vairs] Response to Kelmark Conversion ?

[PatioMatt at aol.com]

In a message dated 5/11/2005 1:49:20 PM Pacific Daylight Time, 
VairKing at hotmail.com writes:

> so I am convinced the only way to cure it is to install a big car saganaw 
> side cover and run an aftermarket shifter (B and M, Hurst, etc.) and use 
> marine cables to control it.  Talking with Rick at the performance workshop 
> he was talking to me about a source for these marine cables, maybe he will 
> chime in and enlighten us, as I have forgotten.  I will be doing this mod to 
> 
> my V8VAIR before Iowa...
> 
******************************************************************************

Ryan..those are MORSE  cables...available at ANY  Boat / NAPA  
store...approx. $30  for a 5 ft cable....ends are 10x32[?]    BUT

It's a VEGA  box......and I've seen only Kelmarks with long rods / bellcranks 
to actuate the arms..

Matt