[V8Vairs] re-NAPA master/slave

[tom zimmermann]

..Tony,that's the same master I just helped set up in Ron's mid-327..he's using a 1 1/16" slave,Ansen bellhsg and a stock 11" fly/PP..while the engine was in the shop,we set up a bare block/crank to check the clutch travel,alongside the car,but still had to pull the engine out once again to re-adj the ballstud..you should (need,really..) calculate the pedal lever ratio-master piston stroke volume,and what the slave needs to work the fork,then try it first to see if the pedal effort is tolerable..it'll make a difference in driveability..from the napa picture,which side is the brake ,and clutch  you're hooked up to??