[V8Vairs] Q on Throttle Cables

thos mazzoni tommy_mazzoni at yahoo.com
Mon Sep 7 16:09:31 EDT 2009

can anyone send me a pic or website for the morse cable and or how much it is available for i made one for mine its a cable off the original

--- On Sun, 9/6/09, Frank F Parker <fparker at umich.edu> wrote:

From: Frank F Parker <fparker at umich.edu>
Subject: Re: [V8Vairs] Q on Throttle Cables
To: "discussion of non-stock engines in Corvairs" <v8vairs at corvair.org>
Date: Sunday, September 6, 2009, 2:50 PM

> gary-don't know anything about crown cars but i'm using a moarse(sp) in my
> corvair powered avenger. works great. it's a cable with a outer sheath and
> works very smothly and doesn't require much for a return spring. found that
> i had to make sure the outer sheath was secured very tightly and in
> numerious places but other than that. in my case i had to have a u bend to
> reverse direction on the throttle body. worked well-mike mann

It is called a Morse cable and like Mike says, it is usuallt a ss inner 
cable threaded 10-32 on ea end onto which you can put sping loaded ball 
sockets for hooking to carb or throttle body. U can also get  cable
mounts and brackets.

Try a number of marine online sources.



V8Vairs mailing list
V8Vairs at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/


More information about the V8Vairs mailing list