[V8Vairs] common bearing found!!

[Ken Hand]

What kind of HP do you plan to put out? I can have a dual disc 7 1/4" HP clutch made to fit what you have but is only good for 500 HP.
 

 

Ken Hand
248-613-8586
www.corvairmechanic.com

http://s186.photobucket.com/albums/x118/vairmech/Viet%20Nam%20Pictures%201971/


 

 

-----Original Message-----
From: Tom Zimmermann <tz145236 at yahoo.com>
To: v8vairs <v8vairs at corvair.org>
Sent: Wed, Jan 15, 2014 9:40 am
Subject: [V8Vairs] common bearing found!!


..on a whim, walking past the 944 Porsche trans, I decided to mic the output 
shaft where the Porsche output bearing is;; by the H-F digital calipers it's 
1.179"...hhmm..dug up a Saginaw shaft and old bearing,and the shaft mic's at 
1.800" !!--fascinating is the "OD" of the Saginaw bearing matches the OD where 
the 'input'/ clutch gear bearing also fits,meaning I could probably put the 
Saginaw bearing on,and use the 'big-car' release 'snout;,and it's TO 
bearing!!..still waiting for the 'used' Porsche clutch disc I paid for last 
week..
_______________________________________________
V8Vairs mailing list
V8Vairs at corvair.org
http://www.vv.corvair.org/mailman/listinfo/v8vairs
This list sponsored by the Corvair Society of America, http://www.corvair.org/