<VV> Re:Fix the Vapor Lock / SB Vapor BLOCK
J R Read_HML
hmlinc@sbcglobal.net
Wed, 21 Apr 2004 16:10:07 -0500
Sounds like a winner. Good reason to carry a line wrench or two in the car.
Attachments are scanned with anti-virus software.
Later, JR
----- Original Message -----
From: <UltraMonzaWest@aol.com>
To: <virtualvairs@corvair.org>
Sent: Wednesday, April 21, 2004 3:58 PM
Subject: <VV> Re:Fix the Vapor Lock / SB Vapor BLOCK
> If he were to loosen the bolt on the fuel pump and manually operate it,
> would that get him going without the 1/2 hour wait to cool down? Or, does
> he simply have to wait for the vapor to turn back into liquid? Later,
JR
> ********************************************************
>
> To get going quickly..... Loosen a LINE between the pump and carb[s].
> Just one, to release the BLOCK of Vapor.........you'll hear it hiss...
>
> Re- tighten and drive on.... pump will pickup immediately..
>
> Matt
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
the property
> of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs