<VV> Piston Damage from Guide Fragments?
EUGENE1938@aol.com
EUGENE1938@aol.com
Sat, 14 Aug 2004 17:49:32 EDT
pottsf@msn.com writes:
I'd like to know what people think of my continuing on
with the pistons.
Joe,
Clean the piston tops with a brush on a bench grinder then
with a hammer gently tap the high/pointed spots down to
eliminate them. There will still be some low spots but ignore
them. They will eventually fill up with carbon. Go ahead and
use the pistons.
Ed Corson (CORSA member)
IECC - Riverside, CA