<VV> Thermostat problem

BobHelt@aol.com BobHelt@aol.com
Mon, 16 Aug 2004 11:09:00 EDT

In a message dated 8/15/04 7:50:06 PM US Mountain Standard Time, 
hmlinc@sbcglobal.net writes:

> Perhaps the adjusters were just too tight.  They should be set so that 
> doors
> are firmly closed when cold (so they don't rattle), but not so tight that
> they would be pulling strongly on or expanding the bellows.

I believe that the damper doors should be adjusted so that they are fully 
open when the thermostat is fully extended to its stop.
Bob Helt