<VV> Thermostat problem
J R Read_HML
hmlinc@sbcglobal.net
Mon, 16 Aug 2004 14:08:20 -0500
Bob - you are correct on that.
Attachments are scanned with anti-virus software.
Later, JR
----- Original Message -----
From: BobHelt@aol.com
To: hmlinc@sbcglobal.net ; gbeeler@beelerspace.com ;
virtualvairs@corvair.org
Sent: Monday, August 16, 2004 10:09 AM
Subject: Re: <VV> Thermostat problem
In a message dated 8/15/04 7:50:06 PM US Mountain Standard Time,
hmlinc@sbcglobal.net writes:
Perhaps the adjusters were just too tight. They should be set so that
doors
are firmly closed when cold (so they don't rattle), but not so tight that
they would be pulling strongly on or expanding the bellows.
I believe that the damper doors should be adjusted so that they are fully
open when the thermostat is fully extended to its stop.
Regards,
Bob Helt