Rick & Janet Norris rickjanet@charter.net
Wed, 18 Aug 2004 17:43:34 -0400

I lift complete Powertrains with this eye and a cherry picker all the time.
Just be sure it's in good shape.

Rick Norris
First President CORSA 1971
Email rickjanet@charter.net
Web Site http://webpages.charter.net/corvairalley
V8 Vairs Web Site http://www.corvair.org/chapters/v8vairs

> Well, I thought this was going to be easy, it's not. It is not sitting on
> floor where I was going to make a cart, following the directions sent by
> Forman for the ATV lift, and just wench it on to the plywood, and pull the
> whole thing in the van. Finally got some pics from the guy, it is on top
of a
> workbench, wedged under a stairwell. It is going to have to be lifted out
> down to the plywood, then wenched into the van. What I need to know is
> In the pics he sent, built into the clutch housing, between the motor and
> transaxle, is a raised area with a hole in it, is this a lift point? Can
> use this to hook a hoist to and lift the whole thing? If it is, I'll take
> hoist with me and do it that way. The older I have gotten, the more I
> out ways to have machines do the work, not my back. SO, it this a lift
> Thanks BRUCE