<VV> LOWERED FRONT ENDS

[Sadek Charles H DLVA]

As others have told you, you can compensate for quite a bit with the castor
and lower control arm cam adjustment.  You can and sometimes have to add
shims to the upper control arm cross shaft-which is the way bigger Chevy's
are adjusted.  It is just a bit awkward to get in there with wrenches to do
it.

Good Luck

Chuck S

-----Original Message-----
From: Daves69vair@aol.com [mailto:Daves69vair@aol.com] 
Sent: Tuesday, December 21, 2004 5:49 PM
To: virtualvairs@corvair.org
Subject: <VV> LOWERED FRONT ENDS

DOSE ANY ONE KNOW IF LOWERING THE FRONT END WILL SCREW UP THE ALIENMENT ON 
THE CAR. AND IS THERE A WAY TO LOWER IT WITH OUT CUTTING THE SPRINGS  OR 
SPENDING TONS OF MONEY,YET DOING IT  RIGHT.