<VV> Dime size hole in floorboard

[Dave Morris]

Here's a photo of the floorboard of my 66 Corsa convertible.  Do you see 
what you are looking for on mine?
http://www.davemorris.com/Photos/Corvair%20Corsa%20Project/IMG_0250.jpg

Dave Morris

At 08:55 AM 12/22/2004 -0600, you wrote:

>This is probably a stupid question, but an honest, serious one. Is there 
>supposed to be a small hole (dime-sized)in the floorboard of a 66 vert on 
>the drivers side floor, about 10-12" below the high beam selector? This 
>hole looks perfectly round, has nicely raised edges, like it was put there 
>on purpose. I checked the 66 chassis manual and the shop manual and see no 
>reference to it. I just don't know if I should weld it up or leave it. It 
>does not look rusty at all and there is NO other rust in the floor and I 
>dont want to weld up something that is supposed to be there...
>
>Thanks very much in advance.
>
>Mark Chapman
>  _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are 
>the property
>of the writer, please attribute properly. For help, mailto:vv-help@corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs@corvair.org
>List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
>  _______________________________________________