<VV> Re: REAR BRAKE CYLS ON EARLY CARS(AND VANS)

[N2VZD@aol.com]

Sometimes you may find it easier to get the clyinders off by taking the four 
nuts off holding the axle bearing and letting the axle/backing plate come away 
from the control arm. then you have tons more working room . use 6 point 
sockets so you dont round off the bolts!!  and take it slow so you dont break them 
off in the cylinders. use blaster or something.i loosen the hose before the 
backing plate          
 regards tim colson